Produit Archivé

Système de caméras fibre hybride Neutrik Fiber / Clear-Com Intercom / IDX VMount

FS-790PNVCG

FS-790PNVCG
FS-790PNVCGFS-790PNVCGFS-790PNVCGFS-790PNVCG
    Conçu exclusivement pour les caméscopes ProHD GY-HM890 de JVC, le système de multiplexage fibre optique FS-790 remplace les câbles multicœurs encombrants par un câble fibre optique robuste et léger. Technologie idéale pour les studios de production, les systèmes de car-régie, les événements sportifs, les concerts ou les lieux de culte, la fibre assure une communication bidirectionnelle fiable entre les caméras et les systèmes de commande.

    Caractéristiques

    • Package based on: KA-F790NG Camera adapter with Neutrik and IDX VMount RM-FP790PNCG Powered Base Station No Power with Neutrik and Clear-Com Intercom VC-P790RMG Base Remote cable for RMLP25 KA-PW790VG Power Wafer
    • Camera back transceiver module attaches directly to the GY-HM890 body using a hidden 68-pin connector
    • The system simultaneously transports bidirectional digital (SDI or HD-SDI) and analog (NTSC or PAL) video
    • 1 RU CopperHead Base Station
    • Two-way camera control, audio, video, data, sync, timecode, tally/call, prompter, and intercom signals between the camera head and CopperHead Base Station
    • SMPTE or Neutrik Hybrid Fiber adds power capability and can deliver up to 100W of power to the camera Both cables are immune to interference
      Spécifications techniques

      FS-790PNVCG - Système de caméras fibre hybride Neutrik Fiber / Clear-Com Intercom / IDX VMount

      Info
      System usable for:
      Camera Type:
      GY-HM890E/GY-HM890CHE
      System Signal Support
      Video Signal Format max:
      1080i /50/60 SMPTE 259M, 292M
      Return Signal Format max:
      1080I /50/60 additional 2 VBS Returns
      Number of Audio Channels
      2
      Audio Type
      Balanced, Line Level
      Audio Impedance
      >15KOhm
      Audio Max Input Level
      24 dBu
      Audio Frequency Response
      20Hz to 20 KHz
      Audio Intercom Format:
      RTS 1 Channel
      4 Wire Intercom:
      Oui
      2 Wire Intercom:
      Oui
      Intercom Audio Frequency Response
      200-18KHz +/- 3 dB
      Intercom Audio Max Gain
      RTS or Clear-Com >24dB
      Intercom Audio Min. Gain
      RTS or Clear-Com <= 45dB
      Genlock
      HD Y-Signal or Tri-Level / SD VBS Signal
      IP Ethernet Interface for Camera
      NO
      Head unit build in IP Interface adapter for Camera USB Host connections
      NO
      LANC support for remote units
      NO
      Serial remote support control
      Oui
      Tally support
      Oui
      System Cable maximal length
      Notes on fiber with Copper
      Fiber Cable includes Copper Wires to support Camera Power from Base station to the Camera Head (power Wafer) depending on the System and internal High Voltage is used.
      Fiber with Copper max Cable length:
      500 mètres
      Notes on Fiber cable by Tactical use:
      If you use tactical cable the power of the head unit must be prepare at the camera end. Tactical systems have no copper lines and transport only the Video and Control signals (no Power)
      Fiber max. length in Tactical use:
      10000 mètres
      Electro-Optical operating Wavelengths
      1300nm/1550nm
      Electro-Optical TX Laser Output Power (std/opt)
      -6dBm/0dBm
      Electro-Optical RX Sensitivity, HD/SDI
      -22 dBm
      Electro-Optical Fiber Compatibility:
      Single Mode
      IN-OUT´s Connections
      From Camera
      HDSDI
      From Camera:
      VBS Program
      From Camera
      Camera Control /RS232/422
      From Camera
      Time Code
      From Camera
      Audio 1 and Audio 2
      To Camera
      HDSDI Return Video
      To Camera
      VBS Return 1 (G/L)
      To Camera
      VBS Return 2 Prompter
      To Camera
      VBS Return 3 VBS
      To Camera
      Time Code
      To Camera
      Tally
      To Camera
      Audio Return
      To Camera
      Intercom (One Channel)
      Divers
      Power (only and Hybrid systems)
      Power and Environment Spec´s
      Alimentation
      220V Base-Station
      Power Camera Unit
      10-18VDC
      Power consumption Camera Unit
      8 Watts
      Power Base Station
      10-18VDC
      Power consumption Base Station
      10 Watts
      Operation Temperature in Celsius
      -25 to 55 degree
      Operation Humidity:(Non-Condensing)
      0% to 95%
      Mechanical Informations
      Base station dimensions:
      W:444,5mm / H:228,6mm / D:44,4mm
      Base station dimensions RACK height in Unit
      1 U
      Base station weight:
      2,27 Kg
      Head unit dimensions:
      W:63,5mm / H:165,1mm / D:55,8mm
      Head unit weight:
      0,68 Kg
      Power Wafer dimensions:
      W:127mm / H:155,4mm / D:55,8mm
      Power Wafer weight:
      0,68 kg
      Include Package
      Instruction;
      Oui
      Others:
      See above feature Information
      General Editing Note
      Note:
      Images simulées.Les valeurs de poids et de dimensions sont approximatives.E.&O.E. Conception et spécifications sujettes à modification sans préavis.
      Accessoires

      Image of Hybrid Fiber Cable NEUTRIK (FS-CABHYB100)

      FS-CABHYB100

      Câble fibre hybride NEUTRIK

      Détail

      Image of Hybrid Fiber Cable NEUTRIK (FS-CABHYB200)

      FS-CABHYB200

      Câble fibre hybride NEUTRIK

      Détail

      Image of Hybrid Fiber Cable NEUTRIK (FS-CABHYB500)

      FS-CABHYB500

      Câble fibre hybride NEUTRIK

      Détail

      Image of Hybrid Fiber Cable NEUTRIK (FS-CABHYB700)

      FS-CABHYB700

      Câble fibre hybride NEUTRIK

      Détail

      Produits Associés

      Image of Camera Fiber System (FS-900)

      FS-900

      Système fibre hybride pour caméras Fibre Neutrik / Intercom Clear-Com / Monture V

      Détail